Site Information

 Loading... Please wait...

Click to enlarge

  • Image 1
  • Image 2

Harley Davidson TC96 103 110 Inner Cam Bearing Set

Usually ships the same business day

Out of Stock

Product Description

THIS LISTING IS FOR EVERYTHING PICTURED! Set of Inner Cam Bearing Puller and Installation Tools Designed for Twin Cam and Dyna models. Will work on all TC96, 103 and 110s that use the B168 bearings. This set will remove and install the inner cam bearings on newer model Twin Cams and Dyna Harleys. We also have new Torrington-Koyo B-168 bearings available in our store under the Harley Davidson section! This set includes our Improved collet design. The design sold by others has the whole back of the collet threaded with two slots cut into the threads for turning a wrench on. It's simple, it's cheap, and it's bad. Use that design once or twice, and you may damage the threads where the wrench makes contact, requiring you to now clean up those threads before you can even get the nut off the collet and use it again.We've worked around this issue by moving the threads up on the collet  to allow for a more controlled grip and protection of threads. We've also completely redesigned the installer plate, zeroing in on the correct hole placement by taking apart an engine and putting it on a digital drafting table to get the precise placement of all of the important dimensions. This set comes with our "T" pin for easier insertion and removal from the collet! But the BIGGEST improvement of this set is in what is NOT there. We have completely reworked how the process of pulling and installing the bearings works - we've made it easier, faster, and better. Instead of using a sleeve, nut, and washer with the collet to pull the bearings, the collet is threaded through the plate, and is inserted into the bearing. Once you hear the "click" of the collet passing the bearing on the inside, simply insert our "T" pin for a secure lock, and begin to pull the bearing! Once the bearing is out, you are ready to insert the new bearing in right away! Instead of using the installer plate with a bolt and a driver, we've made the collet from the puller into the bolt. The driver attaches on top of the collet, and the "T" pin is used to lock it all in place. This can be done immediately after pulling the old bearing, with it still hanging on the collet. Once done with the installation of the new bearing, take out the "T" pin, remove the driver, unscrew the collet from the plate, and switch sides to repeat the process. Plus, with our window modification, you get to see the whole process and get it done right! This set includes our Patent Pending window modification to the installer plate. You paid too much for the bike and the tools to end up cracking the engine case because you can't see the bearing! With the redesign, you will never again have to squint through a tiny hole with a flash light!

This set includes our Patent Pending use design - no one else on the market has a tool quite like this (or at this price!) Instructions are available for this set, please send us an email if you would like to get a copy of the instructions emailed! 100% Made in the United States. ***Tool Comes with Black Oxide Coating For Years of Use*** ***A higher quality tool than the competition***

Product Reviews

Write Review

  1. Inter bearing tool

    Posted by Joseph Deak on 17th Jul 2019

    Great tool very well built and easy to use, once I saw somebody on YouTube use it. Would have gave it 5 stars but there was no directions or tips. I Would, however, recommend the tool it should last a long time well designed no problem pulling the bearings or pressing in the new bearings.

  2. 2 flats

    Posted by Nickster on 30th Jul 2018

    the bearing removal collet post only has 2 flats on the one you sent me. thought it was supposed to be a hex

  3. Quality looking tool

    Posted by Donald S Reece on 10th May 2018

    Got this in a very timely manner. I have to use it as I am waiting on the correct cams but looks well built and should work out just fine.

  4. Initial Review

    Posted by Brad Knopp on 3rd Jan 2018

    I just received my cam bearing tool as I ordered it just before Christmas and I haven't had a chance to do my cam swap yet but just handling the tool(s) I am very happy with choosing Heartland Tools. Once I do the cam swap and change out the inner cam bearings using this tool I will update my review.

  5. Great tools

    Posted by on 17th Apr 2017

    Worked perfect!

  6. Quality tool at a great price

    Posted by Ben on 17th Apr 2017

    was looking for a cheaper tool than HD while still being a quality product that would get the job done. Very happy with it. Did have to initially bend the puller jaws together for the first bearing, but after that was just fine (broke in). Would recommend this product.

  7. Quality Stuff

    Posted by Jim DeBatty on 7th Feb 2017

    Haven't used it yet but it's solid and very nice quality, should work just fine.

  8. Worked Perfectly

    Posted by Thomas on 22nd Apr 2016

    Great price. Worked perfectly!

Customers also viewed