Site Information

 Loading... Please wait...

Click to enlarge

  • Image 1

Heartland Products TC88 96 103 110 Inner Cam Bearing Set

$144.99
SKU:
HPTC96-C29_HPTCAA-A29
Availability:
Usually ships the same business day
Quantity:

Product Description

THIS LISTING IS FOR EVERYTHING PICTURED! Set of Inner Cam Bearing Puller and Installation Tools Designed for Twin Cam and Dyna models. Will work on all TC88, 96, 103 and 110s that use the B148 or the B168 bearings. This set will remove and install the inner cam bearings on both newer and older model Twin Cams and Dyna Harleys. We also have new Torrington-Koyo B-148 and B-168 bearings available in our store under the Harley Davidson section! This set includes our Improved collet design. The design sold by others has the whole back of the collet threaded with two slots cut into the threads for turning a wrench on. It's simple, it's cheap, and it's bad. Use that design once or twice, and you may damage the threads where the wrench makes contact, requiring you to now clean up those threads before you can even get the nut off the collet and use it again. We've worked around this issue by moving the threads up on the collet and adding a 15mm full hex at the end to allow for a more controlled grip and protection of threads. We've also completely redesigned the installer plate, zeroing in on the correct hole placement by taking apart an engine and putting it on a digital drafting table to get the precise placement of all of the important dimensions. This set comes with our "T" pin for easier insertion and removal from the collet! But the BIGGEST improvement of this set is in what is NOT there. We have completely reworked how the process of pulling and installing the bearings works - we've made it easier, faster, and better. Instead of using a sleeve, nut, and washer with the collet to pull the bearings, the collet is threaded through the plate, and is inserted into the bearing. Once you hear the "click" of the collet passing the bearing on the inside, simply insert our "T" pin for a secure lock, and begin to pull the bearing! Once the bearing is out, you are ready to insert the new bearing in right away! Instead of using the installer plate with a bolt and a driver, we've made the collet from the puller into the bolt. The driver attaches on top of the collet, and the "T" pin is used to lock it all in place. This can be done immediately after pulling the old bearing, with it still hanging on the collet. Once done with the installation of the new bearing, take out the "T" pin, remove the driver, unscrew the collet from the plate, and switch sides to repeat the process. Plus, with our window modification, you get to see the whole process and get it done right! This set includes our Patent Pending window modification to the installer plate. You paid too much for the bike and the tools to end up cracking the engine case because you can't see the bearing! With the redesign, you will never again have to squint through a tiny hole with a flash light!  photo Comparisonpp.jpg This set includes our Patent Pending use design - no one else on the market has a tool quite like this (or at this price!) Instructions are available for this set, please send us an email if you would like to get a copy of the instructions emailed! 100% Made in the United States. ***Tool Comes with Black Oxide Coating For Years of Use*** ***A higher quality tool than the competition***

Product Reviews

Write Review

Showing reviews 1-10 of 15 | Next

  1. Piece -O-cake

    Posted by Unknown on 21st Aug 2017

    Yeah first thing i said after buying this tool is i could have made it myself but I didn't no i bought it and it worked like a charm so easy and quick too use. Good product and product supplier it arrive when they said it would.

  2. Quality tool

    Posted by Dale on 19th Mar 2017

    I still haven't decided on what cam I'm installing yet. But compared to other similar tools I've looked at its very good quality and a very good price.

  3. Great affordable product

    Posted by Doug on 12th Dec 2016

    Ordered the TC 88, 96, 103 cam bearing tool. Arrived quick, just used the tool before writing this 12-12-16 & I got to say it was effortless. Very good tool, easy to use & a good price! Thank you heartland products!

  4. Harley Inner Cam Bearing Tool

    Posted by Unknown on 29th Sep 2016

    Haven't had a chance to use it but looks like a quality product. Poorly packaged and no instructions for use. Not a big deal I guess.

  5. Works for me

    Posted by Rcasa1340 on 12th Jul 2016

    Product was received as described. Did the job I needed it to. Thankfully I knew how to use it. No instructions included. Over all great product.

  6. Harley cam bearing removal and install tool

    Posted by John on 21st Apr 2016

    This would have to be one of the best made cam bearing removal and install tools on the market, it is a good quality solid unit. The new design is also far superior due to the thread not running the risk of binding up, and the notched out window makes it easy to replace new bearing as soon as the old one has been removed.
    Thankyou Heartland for this great product and for a prompt delivery to Western Australia.
    regards
    John

  7. Great Product

    Posted by Bruce on 29th Mar 2016

    Purchased this to do some work on my bike and others. It is solid and very happy with purchase.

  8. Great tool!

    Posted by Unknown on 26th Mar 2016

    Worked perfectly and i couldn't be happier with the quality and how simple it was to use. Made replacing the cam bearings a total breeze!

  9. Great cam puller

    Posted by Tim on 17th Mar 2016

    Very impressed with the quality .The cut away to see what you are doing exactly what you need to do the job right.great tool and price. Great job

  10. Perfect Tool

    Posted by Willy D. on 4th Mar 2016

    1/3 the cost of Harley's. Better built, better function. If you work on Harleys this is the cam tool you want. 5 extra stars*****

Showing reviews 1-10 of 15 | Next

Customers also viewed