THIS LISTING IS FOR EVERYTHING PICTURED! Set of Inner Cam Bearing Puller and Installation Tools Designed for Twin Cam and Dyna models. Will work on all TC88, 96, 103 and 110s that use the B148 or the B168 bearings. This set will remove and install the inner cam bearings on both newer and older model Twin Cams and Dyna Harleys. We also have new Torrington-Koyo B-148 and B-168 bearings available in our store under the Harley Davidson section! This set includes our Improved collet design. The design sold by others has the whole back of the collet threaded with two slots cut into the threads for turning a wrench on. It's simple, it's cheap, and it's bad. Use that design once or twice, and you may damage the threads where the wrench makes contact, requiring you to now clean up those threads before you can even get the nut off the collet and use it again. We've worked around this issue by moving the threads up on the collet and adding a 15mm full hex at the end to allow for a more controlled grip and protection of threads. We've also completely redesigned the installer plate, zeroing in on the correct hole placement by taking apart an engine and putting it on a digital drafting table to get the precise placement of all of the important dimensions. This set comes with our "T" pin for easier insertion and removal from the collet! But the BIGGEST improvement of this set is in what is NOT there. We have completely reworked how the process of pulling and installing the bearings works - we've made it easier, faster, and better. Instead of using a sleeve, nut, and washer with the collet to pull the bearings, the collet is threaded through the plate, and is inserted into the bearing. Once you hear the "click" of the collet passing the bearing on the inside, simply insert our "T" pin for a secure lock, and begin to pull the bearing! Once the bearing is out, you are ready to insert the new bearing in right away! Instead of using the installer plate with a bolt and a driver, we've made the collet from the puller into the bolt. The driver attaches on top of the collet, and the "T" pin is used to lock it all in place. This can be done immediately after pulling the old bearing, with it still hanging on the collet. Once done with the installation of the new bearing, take out the "T" pin, remove the driver, unscrew the collet from the plate, and switch sides to repeat the process. Plus, with our window modification, you get to see the whole process and get it done right! This set includes our Patent Pending window modification to the installer plate. You paid too much for the bike and the tools to end up cracking the engine case because you can't see the bearing! With the redesign, you will never again have to squint through a tiny hole with a flash light!
This set includes our Patent Pending use design - no one else on the market has a tool quite like this (or at this price!) Instructions are available for this set, please send us an email if you would like to get a copy of the instructions emailed! 100% Made in the United States. ***Tool Comes with Black Oxide Coating For Years of Use*** ***A higher quality tool than the competition***
Previous | Showing reviews 11-15 of 15
Well made and delivered on time
Posted by Rick on 5th Feb 2016
I just received the cam gear tool and have not actually used it yet so that's why I gave it a 4 and not a 5. It was quickly shipped and arrived before I expected it. I examined the parts and they look well made. I am still waiting on Harley Davidson to ship all the parts I need before I can start my cam upgrade on my TC88 and actually use the tool.
Heartland bearing tool
Posted by Don on 22nd Jan 2016
Excellent tool, worked great on my 88 TC, and will do friends 103 as well, quality made tool.
good tool saves money and time
Posted by Unknown on 25th Oct 2015
good tool should have some some instruction with it . but I figured it out
Well built tools
Posted by Unknown on 1st Aug 2015
remove inner cam bearing on my 2013 Harley and install new bearings no problems.Great buy
Changing Cam Bearings is Easy
Posted by Unknown on 22nd Jul 2015
I changed the inner cam bearings on my wife's 03 Dyna and it was very easy with this tool. I particularly appreciated the window modification opening on the mount plate which makes it very easy to ensure you are properly seating the bearing. I plan on changing the bearings on my Street Glide in the near future.
Previous | Showing reviews 11-15 of 15